- LIFTING EQUIPMENT (133)
- Aardwolf Slab Lifters (10)
- Slab Lifters (21)
- Vacuum Lifters (60)
- Vacuum Tube Lifters (3)
- Carton Box Lifter (1)
- Drum Lifters (1)
- BAG LIFTERS (1)
- Rock Lifters (3)
- Brick Lifters (2)
- Pipe Lifters (6)
- Glass Lifters (3)
- Load Handling Attachments (4)
- Slab Bundle Handler (3)
- Stone Carrying Hand Clamps (5)
- Hand Vacuum Cups (5)
- Cargo Lashings & Slings (5)
- Jib Cranes (14)
- FORKLIFT EQUIPMENT (27)
- SLAB & BUNDLE RACKS (26)
- A-FRAMES (45)
- TROLLEYS (18)
- WORKBENCHES & STANDS (28)
- WORKSHOP EQUIPMENT (52)
- ADHESIVES (0)
- Diarex (8)
- Workwear (14)
Electric Anchor Machine
General
The Electric Anchor Machine manufactured by Aardwolf Industries LLC features electric grinders and a vacuum-powered base. It is used to cut T-slots in the back of vanity tops for the attachment of anchor bolts used in the under-counter sink or architectural facing systems. Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near edges.
Features
- Industrial quick-couplers for both air and water
- Combination port that allows the vacuum to be applied with compressed air via the built-in venturi vacuum generator or directly via an electric/battery vacuum pump
- The grinders accept any T diamond bit with a 6mm shank
- A water hose with a ball valve and quick-coupler can be quickly detached and used to spray the work area
- The machine cuts in both push and pull directions
- Alignment indicators on the machine base
- Machined, anodized aluminum components
- Moulded rubber vacuum base seal
Specifications
|
Metric
|
Imperial
|
|
| Net weight | 4 kg | 9 lb |
| Collet diameter | 6 mm | 0.2" |
| No-load speed 30,000 RPM | ||
| Aardwolf Powerful 750W Motor | ||
| Water connection hose thread- 1/4" PT | ||
| Air connection 1/4" industrial series coupler plug | ||
| Vacuum base -80 kPa vacuum | ||
Volume: 0.0000 M3
General
The Electric Anchor Machine manufactured by Aardwolf Industries LLC features electric grinders and a vacuum-powered base. It is used to cut T-slots in the back of vanity tops for the attachment of anchor bolts used in the under-counter sink or architectural facing systems. Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near edges.
Features
- Industrial quick-couplers for both air and water
- Combination port that allows the vacuum to be applied with compressed air via the built-in venturi vacuum generator or directly via an electric/battery vacuum pump
- The grinders accept any T diamond bit with a 6mm shank
- A water hose with a ball valve and quick-coupler can be quickly detached and used to spray the work area
- The machine cuts in both push and pull directions
- Alignment indicators on the machine base
- Machined, anodized aluminum components
- Moulded rubber vacuum base seal
Specifications
|
Metric
|
Imperial
|
|
| Net weight | 4 kg | 9 lb |
| Collet diameter | 6 mm | 0.2" |
| No-load speed 30,000 RPM | ||
| Aardwolf Powerful 750W Motor | ||
| Water connection hose thread- 1/4" PT | ||
| Air connection 1/4" industrial series coupler plug | ||
| Vacuum base -80 kPa vacuum | ||
Volume: 0.0000 M3
